Sommatone Amplifiers "Roaring 40" Combos w/ Reverb, Half Power & Boost Switch
Product Description
Sound Clips
Clean / Funky Jam / Overdrive Rock / Texas Blues / Volume Knob Demo / Jazz / Jazz Rhythm / Boost Demo / Slick Powerhouse / Slick Strut / Slick "The Lifter"
Custom Color Chart
Construction, Components & Features
The Roaring amps are constructed using true point-to-point wiring. By mounting all components directly to tube sockets, jacks and pots, they are able to ensure the purest signal path, maximum touch sensitivity and the least amount of tonal degradation.
The reverb circuit is unique as it's wired in parallel with the preamp versus series used by most amp manufacturers. Because of this, our reverb circuitry doesn't color or change the sound in any way. Sommatone amps are handmade and extensively tested for tone as well as reliability.
*Heavy gauge welded aluminum chassis
*Mercury Magnetics transformers
*Stainless steel hardware
*Pair of EL-84's (quad 40 watt)
*Three 12AX7's (five w/reverb)
*F&T and Sprague electrolytic capacitors
*Fast recovery diode rectifier
*Silver-plated Teflon wire
*Carbon composition and metal film resistors
*Tubular polypropylene signal capacitors
Controls
*Blendable bright and normal volume controls
*Master volume (fully bypassed when cranked)
*Full set of tone controls: treble, middle, bass
*Innovative presence control (settings from warm & smooth to chimey & edgy)
*Reverb mix and dwell controls
*Impedance selector 4, 8, and 16 ohm
*Half power switch (40 watt only)
*Main and extension speaker jacks
*Foot switchable boost function
Cabinets
*13-ply birch cabinets with Eminence speakers
Dimensions
*1X12 & 2X10 combo: H=20" W=24" D=9"
*2X12 combo: H=20" W=27" D=10 1/2"
Speakers: 12" Eminence Private Jack / 10" Ragin' Cajun
WE ARE A SOMMATONE CUSTOM SHOP, SO SOME ORDERS COULD TAKE UP TO 8 WEEKS FOR DELIVERY.
Clean / Funky Jam / Overdrive Rock / Texas Blues / Volume Knob Demo / Jazz / Jazz Rhythm / Boost Demo / Slick Powerhouse / Slick Strut / Slick "The Lifter"
Custom Color Chart
Construction, Components & Features
The Roaring amps are constructed using true point-to-point wiring. By mounting all components directly to tube sockets, jacks and pots, they are able to ensure the purest signal path, maximum touch sensitivity and the least amount of tonal degradation.
The reverb circuit is unique as it's wired in parallel with the preamp versus series used by most amp manufacturers. Because of this, our reverb circuitry doesn't color or change the sound in any way. Sommatone amps are handmade and extensively tested for tone as well as reliability.
*Heavy gauge welded aluminum chassis
*Mercury Magnetics transformers
*Stainless steel hardware
*Pair of EL-84's (quad 40 watt)
*Three 12AX7's (five w/reverb)
*F&T and Sprague electrolytic capacitors
*Fast recovery diode rectifier
*Silver-plated Teflon wire
*Carbon composition and metal film resistors
*Tubular polypropylene signal capacitors
Controls
*Blendable bright and normal volume controls
*Master volume (fully bypassed when cranked)
*Full set of tone controls: treble, middle, bass
*Innovative presence control (settings from warm & smooth to chimey & edgy)
*Reverb mix and dwell controls
*Impedance selector 4, 8, and 16 ohm
*Half power switch (40 watt only)
*Main and extension speaker jacks
*Foot switchable boost function
Cabinets
*13-ply birch cabinets with Eminence speakers
Dimensions
*1X12 & 2X10 combo: H=20" W=24" D=9"
*2X12 combo: H=20" W=27" D=10 1/2"
Speakers: 12" Eminence Private Jack / 10" Ragin' Cajun
WE ARE A SOMMATONE CUSTOM SHOP, SO SOME ORDERS COULD TAKE UP TO 8 WEEKS FOR DELIVERY.
Join our Email List for Updates and Special Offers
